• Optimum heat resistance & NO print through

• Superior fatigue & distortion resistance

• Long tool life

ECO-WOLF, INC.'s AL-TOOL^TM is a thixotropic dry mixed compound designed to be mixed with a ISO or Vinyl Ester resin. It is designed to give optimum resistance to heat, fatigue and distortion of vacuum form tooling surfaces and it minimizes print-through. Mix one bag of AL-TOOL^TM with approximately 6.6 lbs of high heat ISO resin. Mix well. AL-TOOL^TM dry mix is supplied in bags designed to yield 1 gal of AL-TOOL^TM to cover 18 sq ft of surface area. AL-TOOL^TM can be brushed or sprayed. Due to the thixotropic nature of this material, pre-mix catalyzation is recommended. Deep cavities may require a combination of spray and brush application.

The oldest molds made with AL-TOOL^TM & T-LAM^TM are still in continuous operation SINCE 1979! Molds made with this combination will withstand 450°F heat exposure with no blisters, cracks or print through and greatly increases a mold's lifespan. Combined, these two superior tooling components produce long-life molds QUICKLY, EFFICIENTLY, AND WITH LOWER FABRICATION COSTS THAN CONVENTIONAL MOLD PRODUCTION TECHNIQUES.